From Austrailia, Violet Wand Instructional
Popularity: 58%
Archive for April, 2009
Mistress Clarissa tries out the Violet Wand
On April - 16 - 2009
Mistress Clarissa tries out the Violet Wand
Popularity: 37%
What NOT to do with a wand
On April - 15 - 2009
DO NOT use a violet wand on the eyes or in the ear. This video is an example of what NOT to do.
Popularity: 35%
Single-tail Violet Wand Whip
On April - 14 - 2009
(conductive single-tail whip)
Popularity: 37%
Violet Wand Events – Submit Now
On April - 14 - 2009
We will be listing any and all events world-wide that involve the use, demonstration or training on violet wands.
If you know of a scheduled event, let us know in the event forum in the Message Boards.
Popularity: 30%
US Wand Manufacturers
On April - 13 - 2009
There are currently three manufacturers of Violet Wands in the United States. Two produce wands for the BDSM community while one produces them for industrial purposes. For all intensive purposes, all three are nearly identical in construction and appearance.
Rupert Huse & Son produces a violet wand they claim has an unlimited run-time. Most wands require a cool-down period to prevent the unit from burning up. Their wands are slightly more expensive but the quality is reported by most customers to be top-notch.
Eclectic Electric manufactures a similar violet wand and many unique electrodes including one for internal use. A computer/website issue last year has caused many complains, unfilled orders and other problems but it appears that current orders are being fulfilled quickly.
The industrial manufacturer is Electro-Technic Products Inc. They do not endorse the use of their device for use on people. They may refuse to sell you the device if you call it a violet wand or imply your intended use. They call it the BD-10A High Frequency Generator Testers for Leak Detection. It is essentially the same device sold by the other manufacturers but has the lowest cost of the three.
The BD-10A is the wand you will find in almost all new kits assembled by violet wand retailers in the United States. To identify the manufacturer of your wand, look on the back next to the adjustment knob.
You can visit the website for each company here:
Rupert Huse & Son
Eclectic Electric
Electro-Technic Products Inc.
Popularity: 100%
Submissions
On April - 13 - 2009
We will be sharing articles on everything from the technology behind the violet wand to experiences using the wand in electro-stim play. Share your knowledge of advanced techniques such as fireplay and branding.
If you have something to share, we want to hear from you. Participation is what will make this place a fantastic resource for wand enthusiasts.
Popularity: 36%
Foot Switch Accessory
On April - 13 - 2009
I recently bought a Treadlite II foot switch manufactured by Linemaster Switch Corporation. It cost about $26 plus shipping and has a single 6 foot cord with a dual plug on the end. You insert this plug into the wall or extension cord, then plug your wand into the back of it. Using a single line like this reduces the cables in your setup.
I purchased the switch for a couple of reasons. First, using the power knob on the back of the wand to turn the power off, as we do to replace electrodes, can wear the adjustment mechanism out prematurely. This is actually mentioned by the manufacturer as an improper way to turn it off. They recommend that the device be unplugged each time you need to swap electrodes.
In electro-play, we all know how inconvenient this would be. Add the bending over to retrieve the electrical plug and you conclude, their must be a better way. The foot switch allows you to just remove your foot from the switch to turn off the power. Switching electrodes was never easier.
Second, safety could be an issue. Using the knob to turn off the power may not always work. Changing the position of the wand can cause slight changes in power level. Tilt the wand wrong after turning the knob to the point of cut-off and you may get a jolt. Unexpected jolts can cause you to drop the wand or worse, injure someone with a prop or electrode. The foot switch cuts the power so there is no way to get that unintended jolt.
Safety can also be enhanced by the foot switch when it is used as a dead-man’s switch. If you were to trip and fall or remove your foot from the switch for any number of reasons, the power is cut. The safety advantage of not having line voltage running to the wand makes the foot switch a must-have item.
An unexpected bonus to having the foot switch made itself know the first time I used it in a scene. I was able to cut the wand on and off without the “Bottom” knowing if the electrode (or myself in Indirect play) was electrified. I was able to slide the wand around until she let her guard down, then “ZAP!” It is a serious mind game.
If you have a violet wand, or plan to purchase one, I recommend a foot switch without hesitation.
Popularity: 48%
